Today's Pricing

WATERMELON — F.O.B.S AS OF MAY 13

MEXICO CROSSINGS THROUGH NOGALES, ARIZ. — Crossings (705-766-766, seedless 683-751-759, seeded 22-15-7) — Movement expected about the same. Trading seeded slow, others moderate. Prices seedless 35-60 counts lower, others generally unchanged. Red-flesh seedless-type per pound 24-inch bins approximately 35-60 counts mostly 20 cents, 75-80s 14-16 cents; red-flesh seeded-type approximately 35-55 counts 12-14 cents. Flat cartons red-flesh seedless miniature 6-9s $7-9. Quality variable. Many present shipments from prior bookings and/or previous commitments.

LOWER RIO GRANDE VALLEY, TEXAS — Shipments (29-96-255, seedless 26-83-223, seeded 3-13-32) — Movement expected to decrease slightly. Trading very active at slightly lower prices. Prices 24-inch bins per-pound red-flesh seedless-type approximately 35-60 counts 28 cents, seeded-type approximately 28-35 counts mostly 21-22 cents. Quality generally good. Most present shipments from prior bookings and/or previous commitments at lower prices.

FLORIDA — Shipments (124-159-233, red-flesh seeded 16-29-53, red-flesh seedless 51-130-180) — Movement expected to increase as more growers start the season in central Florida. Harvesting slowed. Trading very active. Prices generally unchanged. 24-inch bins per-pound red-flesh seeded-type 35s 24-25 cents; red-flesh seedless-type 45 count 29-30 cents, 60 count 29-30 cents. Quality generally good.

IMPERIAL AND COACHELLA VALLEYS, CALIF., AND CENTRAL AND WESTERN ARIZONA — Shipments (AZ seedless 0-23-16, CA 0-26-78, seedless 0-24-73, seeded 0-2-5) — Movement from western Arizona, Imperial and Coachella valleys expected to increase seasonally. Trading fairly active at slightly lower prices. Prices slightly lower. Red-flesh seedless-type per pound 24-inch bins approximately 35 and 45 counts mostly 22 cents. Organic red-flesh seedless 24-inch bins per pound approximately 35 and 45 counts 35 cents; miniature carton 6s and 8s $20.50. Quality generally good. Harvest central Arizona expected to begin the week of May 27.



Learn More
  • Industry Alerts: USDA proceedings,
    Bankruptcy petitions — Learn more...
  • New Companies: PACA new
    licensees — Learn more...
  • Bankruptcy petitions have been filed by these companies — Learn more...
  • Company Listing changes: Address, personnel,
    contact information — Learn more...

Endive/Escarole

Endive cold-storage building features energy savings

RIO VISTA, Calif. — Richard Collins, president of California Vegetable Specialties, likes to threaten to perform a not-ready-for-primetime stand-up comedy routine.

But he and his partners, S.C. Darbonne, Milly-la-Foret, France, don’t joke when it comes to the long-term viability and expansion of their Belgian endive production and marketing business.

Vicky BoydCalifornia Vegetable Specialties former board chairman Luc Darbonne (left), and president Richard Collins talk after dedicating a new cooling facility at the company. On May 18, the companies dedicated a 20,000-square-foot cold-storage facility expected to save up to 75% on electricity costs while providing a more stable environment for storing chicory roots used to produce endive.

“French endive growers have a saying — the cold room is not a hospital,” Collins said. “The root goes into storage for up to 10 months and won’t come out any better. At best, it will come out in the same condition.”

Collins was referring to the two-step process used to produce Belgian endive. Chicory seeds are planted in the spring in fields and the roots — harvested in the fall — are put in 29-degree cold storage from 30 days up to 10 months.

As orders come in, workers pull the roots from storage, place them upright in trays and put them in temperature-controlled dark rooms to force leaf production.

After about 30 days, workers harvest the tops, which are packed and sold as Belgian endive.

This year, Collins said his company expects to produce a total of about 5 million pounds of white California Pearl and red Belles Rouges endive.

Before the cold storage was built adjacent to the Rio Vista production facility, California Vegetable Specialties relied on Lomo Cold Storage, Live Oak, about 97 miles to the north, Collins said.

‘Off-the-chart’ insulation

The building’s concept is the brainchild of Gary Block, a University of California-Berkeley associate architect professor who’s been experimenting with energy-saving construction techniques for nearly 40 years.

The building’s frame is recycled steel trusses, said Cullen Burda, vice president of Integrated Structures Inc., project architect and engineer.

What’s unique is the cement envelope design that provides an R-100 insulation factor and requires a smaller refrigeration unit to maintain cold temperatures, Burda said.

California building codes only require R-28 insulation for similar buildings.

“The insulation is pretty much off the charts,” he said. “They’re actually shutting down refrigeration between noon and 6.”

By doing so, California Vegetable Specialties can avoid the higher-priced Pacific Gas & Electric peak electricity rates.

The walls are composed of two layers of foam panels, between which expanding polyurethane foam is injected.

Then about 3 inches of concrete is applied to both sides of the wall.

Not only does this help maintain more stable humidity and temperature inside, but it also has a lifespan of at least 200 years and an earthquake seismic rating similar to those of police departments and hospitals, Burda said.

Concrete envelope design isn’t new and has been used since 1994 on a handful of wineries, Burda said. In those structures, straw bales provided about R-87 insulation.

This is the first time foam has been used, “and it worked like a charm,” he said.

The energy savings will pay off the building in about 15 years, Burda said.


Prev 1 2 Next All


Comments (6) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

JV    
Report Abuse
Chico, CA  |  May, 22, 2012 at 06:14 PM

If those energy numbers are correct, it will change the whole industry of cold storage.

tim    
Report Abuse
gilroy  |  May, 23, 2012 at 01:52 PM

High R-values are easily achieved with a variety of existing technologies. The only hard part is getting people to pay for the insulation and installation.

Jill    
Marin  |  May, 24, 2012 at 02:20 PM

Seems like under 3 year ROI and pays for the entire building with energy savings in half the mortgage should get people to pay for insulation and installation.

Winn    
Report Abuse
Oakland  |  May, 24, 2012 at 02:22 PM

Energy prices aren't going down. Seems like a no brainer with those kind of savings.

Skip Novakovich    
Report Abuse
Kennewick, Washington  |  May, 24, 2012 at 05:45 PM

I am continually amazed at the long term cost savings featured being designed into buildings by Integrated Structures. Gary, Cullen, Jenny and the others they work with at Integrated Structures are absolutely amazing in what they are able to design for their clients.

JV    
Report Abuse
Chico, CA  |  May, 25, 2012 at 02:26 PM

With a little digging I was able to find the website for the wall system used at CVS:

http://energymasswall.com

Really interesting stuff... and it doesn't look like it would be that much more expensive than a typical building because they are using mainly off the shelf components...

Feedback Form
Leads to Insight