How Advanced AI Tech is Transforming Potato and Onion Packing Operations

AI-powered grading systems are revolutionizing packinghouse operations, delivering improved quality, efficiency and labor savings.

GPOD_Warehouse.jpg
Automation has prompted some significant changes at Shelley, Idaho-based GPOD over the years, says Ryan Bybee, general manager. “In the last four years, we completely revamped our production line to put in AI sorting and sizing,” he says. The work was completed by KPM Analytics, Westborough, Mass.
(Photo courtesy of GPOD
)

Twenty-five years ago, potato and onion packers began adopting grading cameras that used color comparison technology and pixel counts to determine product size. While some operations still rely on that technology, advances in artificial intelligence have dramatically improved grading and sorting capabilities.

“AI has changed produce grading, taking it from good to great,” says Jeremy West, national sales manager, Agricultural Vision Inspection — KPM Analytics, Westborough, Mass. “Defects that used to be difficult or impossible to get are now able to be sorted out.”

Despite these advances, fully automated packing lines remain relatively uncommon.

“Most lines still have human sorters, just far fewer than before,” he says.

Grower-Shippers Embrace the Technology

New technology is modernizing potato and onion packinghouses, and grower-shippers say they’re reaping the benefits.

“We’ve been using advanced AI-powered grading technology and automation in our onion and russet potato operations for a few years,” says Coleman Oswald, director of sales for Eagle Eye Produce, Idaho Falls, Idaho. “With the completion of our new red and yellow potato facility in Idaho Falls, we’ve now brought the same technology to all of our major packing operations.”

The technology-driven investments have allowed the company to pack more product, improve efficiency, reduce waste and deliver more consistent quality and sizing to its customers, he says.

Automation has prompted some significant changes at Shelley, Idaho-based GPOD over the years, says Ryan Bybee, general manager.

“In the last four years, we completely revamped our production line to put in AI sorting and sizing,” he says.

The company also installed automated robotic case-packing equipment for its consumer packs this summer.

“AI sorting and sizing results in a more consistent quality and size pack because AI learns as it goes,” Bybee says. “It never gets tired, and it doesn’t have an opinion.”

The Onion House in Weslaco, Texas, transitioned to all-automatic weighing, bagging and palletizing this year, says salesman Colton Neuhaus.

“This will make for a much more efficient production process as well as improved the quality of our products,” he says.

Multiple Advantages

West says grading and sorting systems today offer several significant advantages, including:

  • Reduced labor — “AI models can catch difficult defects, so fewer people are needed. With rising wages, overtime costs and trouble finding workers, this lowers the cost to pack.”
  • Product consistency — “Cameras and AI grade the same way at the end of the day as at the start. They don’t get tired.”
  • Accuracy — “We can measure the exact size of defects and determine the surface area that those defects cover. And software can be quickly set to exact customer specifications to make sure each customer gets the quality they expect.”
  • Data acquisition — “Because every piece is scanned, you get detailed data on each lot running through the pack shed.”

The amount of data provided by cameras capturing the product image is substantial.
“At minimum, that image should be turned into data about the size, shape, weight and how much of each type of defect is present,” West says.

Operators can then set the software to match requirements that can vary by customer.
Ultimately, automated systems can help packers keep the costs of a sorting operation competitive and maximize product value, West says. And better grading means less good product gets thrown out, and fewer loads get rejected. That means less wasted water, energy and fuel.

Costs Can Be Significant

All this modern equipment doesn’t come cheap. “It’s a big investment, but the long-term savings can be significant,” Oswald says.

There is a significant upfront cost associated with automation. That cost can vary depending on the throughput of the sorting technology and how advanced the new or upgraded technology is, West says.

“It can be anywhere from $160,000 to $5 million for just the sorting technology,” he says.

“This new technology is not cheap, as everyone knows that is in this industry, but in the long term, it should allow us to run/process onions much more efficiently and hopefully reduce the production cost per unit by getting rid of a fair amount of labor,” Neuhaus says.

The timeframe for a return on investment can range from 10 months to five years, depending on the scope of the project.

“Most technology upgrades pay for themselves in three years or less,” he says.

Automation enables Eagle Eye Produce to handle more volume more efficiently with less manual labor, which is important as labor costs continue to rise, Oswald says.

“It’s also helped us move employees away from repetitive tasks and into other areas of the operation,” he adds.

At GPOD, the primary reason for installing the automated systems was to ensure the highest-quality packout, Bybee says. But a secondary benefit has been helping offset labor shortages and costs.

“Labor and labor costs have become a very big issue in the packing facility,” he says. “People don’t want to do this kind of work anymore.”

Implementation and Maintenance

Installing advanced technology is rarely a one-time project.

“Whether it’s mechanical issues with the product or the way packers run their operations for efficiency, technology is required in multiple locations in a shed,” West says.

Most packers start with one area, analyze results and then move to other parts of the facility.

“This spreads out costs and gives the technology time to keep improving,” West says.

Installation timelines vary depending on the complexity of the project. Installing equipment into existing space can take as little a week, but more involved projects can take longer.

“A new line or complete gut and restructuring of a facility can be completed in two to three months, not including building and electrical upgrades,” West says.

Varying Goals

Packer’s goals for installing or upgrading automated systems can vary.

“Some packers want more output, while others want to run the same volume with fewer people or with better quality,” he says. “A modern line can help with any of these.”

Fortunately, repairs and maintenance of automated systems typically aren’t a major hurdle.

“Most operations are self-sufficient on mechanical issues,” West says. “Technology issues are usually handled by phone, since almost all systems can be accessed remotely over the internet.”

In the event of any glitches, GPOD relies on in-house employees to repair the equipment as well as handling maintenance chores, Bybee adds.

Many equipment suppliers, including KPM Analytics, can integrate new equipment into existing lines, West says. Others may take different approaches, depending on the goals of the customer and the scale of the installation.

For West, the most important consideration isn’t just the equipment itself.

“Nothing is perfect out of the box,” he says. “It is important to find someone to work with that wants to be a partner in your business and not just an equipment provider. Don’t settle for a small step up.”

Upcoming Event

Jan. 28–30, 2027  •  Miami Beach, FL

East Coast Produce Expo 2027

Three days of BizMatch+ meetings, trade show and networking at an iconic new location. Plan your trip:

View the agenda ›

Sessions, speakers and the first look at the Fresh Trends Consumer Report.

Explore the venue ›

Fontainebleau Miami Beach. Discounted $409 room rate through Jan. 5.

The Packer logo (567x120)
Get Daily News
GET MARKET ALERTS
Get News & Markets App